Description
Push your runtime to the absolute limit with the Vapcell N40, the highest-capacity 18650 cell currently available on the market. Delivering an unprecedented 4000mAh with a stable 10A continuous discharge, this 2-pack is the ultimate power solution for devices where maximum endurance is non-negotiable: high-output LED flashlights, high-capacity USB power banks, portable fans, solar lights, and DIY battery projects. The flat top design ensures broad compatibility with spring-loaded contacts and simplifies spot-welding for custom packs. With approximately 14% more runtime than standard 3500mAh cells and Vapcell's trusted cell matching, the N40 keeps your essential devices running longer between charges—perfect for extended trips, off-grid living, and professional applications where changing batteries is inconvenient.
Key Features
-
4000mAh Maximum 18650 Capacity – The highest capacity available in a mass-produced 18650 cell. Provides approximately 14% more runtime than 3500mAh cells and about 60% more energy than standard 2500mAh cells. The ultimate upgrade for runtime-critical devices.
-
10A Continuous Discharge – Delivers stable, reliable power for most regulated LED flashlights, USB power banks, portable fans, and similar devices. Enough current for fast-charge protocols and bright flashlight modes without overheating.
-
Flat Top Design – Compatible with all standard 18650 spring-contact chargers, flashlights, and battery trays. The flat terminal is ideal for spot-welding nickel strips in custom battery packs.
-
Long Cycle Life – Retains over 80% of initial capacity after 500 charge/discharge cycles under recommended conditions, reducing long-term replacement costs.
-
2-Pack Convenience – Build a compact 8000mAh power bank with two cells in parallel, keep a spare for your flashlight, or start your DIY pack project.
-
Vapcell Quality Control – Each cell is tested and matched by Vapcell using authentic high-quality cells from major manufacturers (based on Panasonic NCR18650G or equivalent), ensuring consistent capacity and low internal resistance.
Parameters
Applications
Recommended For
-
LED Flashlights & Headlamps: The ultimate 18650 for users who demand the longest possible runtime. On medium modes, a 4000mAh cell can run for days. Ideal for camping, search and rescue, and professional inspection where changing batteries is inconvenient.
-
High-Capacity USB Power Banks: Build a massive 8000mAh power bank with just two cells in parallel. The 10A rating easily supports 18W–30W fast charging protocols. Perfect for weekend trips and emergency preparedness.
-
Portable Fans & Travel Gadgets: Neck fans, handheld fans, and small cooling devices run for hours longer than with standard cells. Great for hot climates and outdoor events.
-
Solar Garden Lights & Street Lights: Low-current, all-night operation. The 4000mAh capacity ensures lights stay bright from dusk till dawn, even after cloudy days.
-
Wireless Security Cameras & Smart Doorbells: Ultra-low standby consumption with months of operation between charges. The extra 500mAh over standard 3500mAh cells provides a meaningful real-world difference.
-
DIY IoT & Sensor Projects: Arduino, ESP32, and Raspberry Pi portable projects benefit from the massive energy reserve for extended field deployment.
-
Medical Devices & Portable Monitors: Reliable, stable power for equipment requiring uninterrupted operation within 10A limits.
Not Recommended For
-
High-Power Vaping / Mechanical Mods (>10A): This is a 10A continuous cell. Sub-ohm builds and high-wattage mods require 15–35A continuous. Using the N40 will cause severe voltage sag, overheating, and potential damage.
-
Cordless Power Tools: Drills, saws, and impact drivers demand 15–40A continuous current. Use dedicated high-drain cells like Vapcell K30 (30A) instead.
-
RC Cars, Drones & High-Drain Models: These require 20–30A+ continuous current. The N40 is designed for capacity, not extreme current.
-
FET-Driven Flashlights Exceeding 10A on Turbo: If your light's turbo mode pulls over 10A, choose a higher-drain cell to avoid damage and maintain full brightness.
FAQ
Q: Is 4000mAh the real capacity? How much more runtime does it give compared to 3500mAh?
A: Yes. The N40 uses an ultra-high-capacity cell core (based on Panasonic NCR18650G or equivalent) that delivers a true 4000mAh under standard test conditions. This provides approximately 14% more runtime than a 3500mAh cell. In practical terms, a flashlight that runs for 4 hours on high with a 3500mAh cell could run for about 4.5 hours with the N40.
Q: Can I use this battery for vaping?
A: No, not for high-power vaping. The N40 has a 10A continuous discharge rating. Most sub-ohm builds and high-wattage regulated mods require 15–35A continuous. Using the N40 will cause severe voltage sag, rapid overheating, and potential battery damage. For vaping, choose a dedicated high-drain cell like the Vapcell K30 (30A continuous).
Q: What devices benefit the most from this cell?
A: Any device drawing under 10A where you want the absolute maximum runtime: LED flashlights on medium/high, USB power banks, portable fans, solar lights, wireless security cameras, and long-running IoT sensor nodes. If you hate changing or recharging batteries frequently, this is the cell for you.
Q: How does the N40 compare to the Vapcell M35 or other 18650 cells?
A: The N40 provides 4000mAh (14% more than the M35's 3500mAh) with the same 10A continuous rating. It is the highest-capacity 18650 Vapcell offers. The M35 is an excellent cell, but if you need every last milliampere-hour of runtime, the N40 is the undisputed champion.
Q: What cell is under the Vapcell wrap? Is it genuine?
A: Vapcell is a reputable rewrapper that uses authentic high-quality cells from major manufacturers. The N40 is based on the Panasonic NCR18650G or equivalent 4000mAh cell—currently the highest-capacity mass-produced 18650. Each batch is tested for capacity and internal resistance to ensure consistency.
Q: Can I build a power bank with these?
A: Absolutely. Two N40 cells in parallel give you approximately 8000mAh—enough to charge most smartphones nearly two full times. The 10A per cell easily supports 18W–30W USB-C PD fast charging. Combined with a quality power bank enclosure, this is one of the most compact high-capacity DIY power bank solutions available.
